Linda and I took a trip to Ohio to visit my brother Dave and his son
Jake. As I am a "termite" I brought some tools, wood and finish and
made some drag racers and a truck.
|
|
|
|
|
|
|
|
|
|
I made these cars in my brother's garage. |
|
|
|
|
|
|
|
|
|
|
This is a picture of me sanding one of the cars in my brother's garage |
|
|
|
|
|
|
|
|
|
|
|
|
One of the assembled drag racers, before contour sanding. |
|
I ripped the boards to width on the table saw at home.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
At my brothers I made the angled cuts with a compound miter saw and glued the boards together with polyurethane glue. After the glued dried I sanded the excess off and leveled the boards with a belt sander. |
|
|
|
|
|
|
|
|
|
|
One of the assembled drag racers after contour sanding. |
|
I used a 1/4 sheet palm sander to contour the cars. |
|
|
|
|
|
|
|
|
|
|
After sanding and polyurethane. |
|
This is a picture of the 2 drag racers and 1 truck before the wheels are attached. |
|
|
|
|
|
|
|
|
|
|
|
This is a photo of one of the compleated Drag Racers |
|
|
|
|
|
|
|
|
|
|
|
|
This is a photo of the other Drag Racer. |
|
|
|
|
|
|
|
|
|
|
|
|
This is a photo of the Truck |
|
|
|
|
|
|
|
|
|
